RCU Forums
0 2023/01/05 15:30:42
Here is the finished product. I may put on the wheel pants but think I am going to pass on the cowl. At least until I see how she flies, balances etc. Now I can get back to my BUSA Sopwith pup after I do some hinge repairs on my Aircruiser (pic attached) and am ready for flying season
Here is the finished product. I may put on the wheel pants but think I am going to pass on the cowl. At least until I see how she flies, balances etc. Now I can get back to my BUSA Sopwith pup after I do some hinge repairs on my Aircruiser (pic attached) and am ready for flying season
0 2025/01/19 14:06:45
0 2025/01/19 14:07:00
Aircruiser
Aircruiser
0 2025/01/19 14:07:13
0 2024/10/30 13:51:47
0 2024/11/01 14:44:21
0 2024/11/01 14:44:39
0 2024/11/18 16:37:23
0 2024/11/21 08:51:32
0 2024/11/21 14:26:31
0 2024/11/06 15:28:25
0 2024/11/22 17:51:00
0 2024/11/22 17:51:15
0 2024/11/24 12:25:52
Wing is now mounted
Wing is now mounted
0 2024/12/03 12:59:00
0 2024/12/03 12:59:15
0 2024/11/21 14:26:56
0 2024/11/11 12:42:54
0 2024/11/12 08:45:11
0 2024/11/12 08:45:29
0 2024/11/18 16:36:28
0 2024/11/18 16:36:58
0 2024/11/18 16:37:12
run some tubing (scrap from throw rods) through the 3/8 square and no kinks in the lines
run some tubing (scrap from throw rods) through the 3/8 square and no kinks in the lines
0 2024/12/26 15:55:38
Explanation - This is the 2nd alteration I have made to this kit. I am using a Saito.82 inverted. In order to get the fuel tank placed for proper draw I needed to extend the bottom of the nose area to accommodate. Also making a hatch so as to be able to service the tank when needed. I plan on glassing that piece just to make it a little firmer for those screws
Explanation - This is the 2nd alteration I have made to this kit. I am using a Saito.82 inverted. In order to get the fuel tank placed for proper draw I needed to extend the bottom of the nose area to accommodate. Also making a hatch so as to be able to service the tank when needed. I plan on glassing that piece just to make it a little firmer for those screws
0 2024/12/09 15:48:55
0 2024/12/09 15:53:59
0 2024/12/09 15:54:11
0 2024/12/09 15:54:35
Another alteration. Not comfortable with the tail wheel setup. So decided to go with a pull-pull system. Added extra servo for tail wheel linked by y- harness with rudder.
Another alteration. Not comfortable with the tail wheel setup. So decided to go with a pull-pull system. Added extra servo for tail wheel linked by y- harness with rudder.
0 2024/12/26 15:50:54
So as to make room w/o interference I elevated the servo 1/8 inch. perfect fit
So as to make room w/o interference I elevated the servo 1/8 inch. perfect fit
0 2024/12/26 15:53:08
Added platform to attach the pull-pull tail system
Added platform to attach the pull-pull tail system
0 2024/12/26 15:57:36
Tail wheel assembly
Tail wheel assembly
0 2025/01/03 15:50:02
0 2025/01/03 15:50:35
Fuse covered with ultracote
Fuse covered with ultracote
0 2025/01/03 15:51:06
Getting ready to align tail feathers
Getting ready to align tail feathers
0 2025/01/03 15:52:55
Mounting horizontal stabilizer
Mounting horizontal stabilizer
0 2025/01/04 15:22:16
Looks to be spot on
Looks to be spot on
0 2025/01/04 15:22:49
Vertical stab connected and started covering the wing
Vertical stab connected and started covering the wing
0 2025/01/08 16:09:23
Finished wing. all hooked up. Just need to add the fuel tank, canopy and wheels and she will be ready for flying season
Finished wing. all hooked up. Just need to add the fuel tank, canopy and wheels and she will be ready for flying season
0 2025/01/12 15:11:20
Starting with fuse formers
Starting with fuse formers
0 2025/10/22 13:58:01
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.