RCU Forums
0 2018/08/27 12:29:37
These arms are at different heights so they do not interfere with each other when they are connect to your 2 servos. EZ to install, no drilling need for the Walbro Carbs
These arms are at different heights so they do not interfere with each other when they are connect to your 2 servos. EZ to install, no drilling need for the Walbro Carbs
0 2018/08/27 12:30:50
These retracts are complete including scale wheels, scale struts, air Tank, air valve, air line and quick brass disconnects with accessories.
These retracts are complete including scale wheels, scale struts, air Tank, air valve, air line and quick brass disconnects with accessories.
0 2018/10/02 16:07:48
Here are the labels with AIL, ELV, RUD, LDG FLP, BAT and more for any radio system you have. You can also custom mark them with a thin sharpie marker.
Here are the labels with AIL, ELV, RUD, LDG FLP, BAT and more for any radio system you have. You can also custom mark them with a thin sharpie marker.
0 2018/12/16 14:02:00
Here are the two parts to the spinner. the back plate mount ahead of the prop with the prop nut and then the nose cone screws on the back plate. Use Tread lock on the treads.
Here are the two parts to the spinner. the back plate mount ahead of the prop with the prop nut and then the nose cone screws on the back plate. Use Tread lock on the treads.
0 2019/01/18 15:57:35
0 2019/02/22 11:31:58
New arms just slide on over the brass arms in the Walbro Carb. No drilling necessary to fit.
New arms just slide on over the brass arms in the Walbro Carb. No drilling necessary to fit.
0 2019/02/22 11:33:58
0 2019/02/22 11:36:45
0 2019/02/22 11:37:06
You can see the arms installed on this rear mounted Walbro Carb how the difference in height works so push rods will not touch when in operation!
You can see the arms installed on this rear mounted Walbro Carb how the difference in height works so push rods will not touch when in operation!
0 2019/05/31 11:07:26
Here are the CNC Throttle and Choke arms standing alone so you can see the difference in size of each arm for the Walbro Carb.
Here are the CNC Throttle and Choke arms standing alone so you can see the difference in size of each arm for the Walbro Carb.
0 2019/05/31 11:10:42
Agreed to be one of the best flying bipes ever! Here is a good deal for the plane and the engine and never crashed!
Agreed to be one of the best flying bipes ever! Here is a good deal for the plane and the engine and never crashed!
0 2019/05/31 11:19:09
Retract unit is CNC machine with Aircraft Grade aluminum, scale struts, air tanks, valves and accessories for Only $119.00
Retract unit is CNC machine with Aircraft Grade aluminum, scale struts, air tanks, valves and accessories for Only $119.00
0 2019/06/01 18:37:12
Different sizes and shapes to fit you model 1/6 or 1/4 scale that can be modified!
Different sizes and shapes to fit you model 1/6 or 1/4 scale that can be modified!
0 2019/06/01 18:39:02
Match plugs with Marking and Color at the same time to make a Fast and Accurate hook up of your servos the very first time. They stick like mad!
Match plugs with Marking and Color at the same time to make a Fast and Accurate hook up of your servos the very first time. They stick like mad!
0 2019/06/02 13:40:47
Long clear neck to reach those "Hard to reach places" and see the blue thread lock as it comes down. Air tight screw on cap keeps the thread lock from setting up in the bottle!
Long clear neck to reach those "Hard to reach places" and see the blue thread lock as it comes down. Air tight screw on cap keeps the thread lock from setting up in the bottle!
0 2019/06/02 13:52:21
EZ to hold onto and with a long clear nose to get into those hard to reach places with a air tight screw on black cap at an affordable price too!
EZ to hold onto and with a long clear nose to get into those hard to reach places with a air tight screw on black cap at an affordable price too!
0 2019/06/02 14:04:04
Small transmitter you can wear on your hat held on tightly by a very strong magnet. No holes in your HAT!
Small transmitter you can wear on your hat held on tightly by a very strong magnet. No holes in your HAT!
0 2019/06/02 14:14:09
Compare the size to the new penny in the photo, you will get lots of comments when you put it on your hat!
Compare the size to the new penny in the photo, you will get lots of comments when you put it on your hat!
0 2019/06/02 14:15:25
Largest wheel at top of photo is the 4 1/2" scale wheel from ESM with a bold together meal wheel and low bounce rubber tire.
Largest wheel at top of photo is the 4 1/2" scale wheel from ESM with a bold together meal wheel and low bounce rubber tire.
0 2019/06/02 14:24:29
Get the spinner you need for the same price! Red strip is sold our as well as the Green one!
Get the spinner you need for the same price! Red strip is sold our as well as the Green one!
0 2019/06/03 14:54:55
All metal back plate plus prop shaft adapter included for $12.95!
All metal back plate plus prop shaft adapter included for $12.95!
0 2019/06/03 14:56:05
All metal hubs that bolt together with low bounce tires that are 4 1/2" NIB!
All metal hubs that bolt together with low bounce tires that are 4 1/2" NIB!
0 2019/06/03 15:06:02
You can use these for drilling into hard to reach places, wings and fuselage in 3 useful sizes: 1/4", 3/32" and 1/8"
You can use these for drilling into hard to reach places, wings and fuselage in 3 useful sizes: 1/4", 3/32" and 1/8"
0 2019/06/03 15:16:30
Build you own custom panel in just one evening in 1/6 or 1/4 scale with the bezels, in round and square with FREE printed instruments.
Build you own custom panel in just one evening in 1/6 or 1/4 scale with the bezels, in round and square with FREE printed instruments.
0 2019/06/03 15:24:18
L to R square and round 1/4 scale bezels then 1/6 scale bezels in square and round. rudder petals, spark plugs for dummy engines and steering yokes.
L to R square and round 1/4 scale bezels then 1/6 scale bezels in square and round. rudder petals, spark plugs for dummy engines and steering yokes.
0 2019/06/03 15:26:19
4" wheels and only 3/4" on the tread to fit into wheel pans with ease. Metal hubs will hold up under hard landings too!
4" wheels and only 3/4" on the tread to fit into wheel pans with ease. Metal hubs will hold up under hard landings too!
0 2019/06/04 10:22:00
Great looking scale tail wheel with metal hub that bolts together and will take the impact of a 1/4 scale plane.
Great looking scale tail wheel with metal hub that bolts together and will take the impact of a 1/4 scale plane.
0 2019/06/04 10:24:36
From left to right and then top to bottom on the listings. Only one muffler has be sold in this picture you have a better selection.
From left to right and then top to bottom on the listings. Only one muffler has be sold in this picture you have a better selection.
0 2019/06/07 12:17:05
Here is the right side of the engine with exhaust pipe and needle valve shown.
Here is the right side of the engine with exhaust pipe and needle valve shown.
0 2019/06/14 10:56:46
0 2019/06/14 10:58:09
Right side of engine show here.
Right side of engine show here.
0 2019/06/14 10:58:34
Here is the top of the engine.
Here is the top of the engine.
0 2019/06/14 10:59:17
Here is the head on view of the engine. I has no damage and is in good running shape.
Here is the head on view of the engine. I has no damage and is in good running shape.
0 2019/06/14 10:59:48
Just add receiver, servos and your choice of glow engine or electric and go fly. Never crashed with some hanger rash.
Just add receiver, servos and your choice of glow engine or electric and go fly. Never crashed with some hanger rash.
0 2019/06/15 11:25:23
Here is a look at the fuse before covering with yellow Moncoat
Here is a look at the fuse before covering with yellow Moncoat
0 2019/06/15 11:40:12
Here is the way the kit came with already cut foam wings.
Here is the way the kit came with already cut foam wings.
0 2019/06/15 11:41:49
Here is the construction of the model before being covered with Yellow Monocoat.
Here is the construction of the model before being covered with Yellow Monocoat.
0 2019/06/15 11:42:35
Here is an alternate paint scheme of an ACE T-34 sport.
Here is an alternate paint scheme of an ACE T-34 sport.
0 2019/06/15 11:44:38
Here is a picture of the two arms that are different heights so the will not touch when installed.
Here is a picture of the two arms that are different heights so the will not touch when installed.
0 2019/06/15 11:56:06
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.